Saltar al contenido principal

Introducción

This guide is to help you replace your fan on the HP Envy Sleekbook m6-k010dx.

Partes

No se especificaron partes.

  1. Remove the twelve 9 mm Phillips #00 screws.
    • Remove the twelve 9 mm Phillips #00 screws.

  2. Use the plastic opening tool and your hands to remove the bottom cover. Use the plastic opening tool and your hands to remove the bottom cover.
    • Use the plastic opening tool and your hands to remove the bottom cover.

  3. Disconnect the battery power cable from the motherboard.
    • Disconnect the battery power cable from the motherboard.

  4. Kits del Apple Watch

    Screen and battery repairs just got easier.

    Comprar Ahora

    Kits del Apple Watch

    Screen and battery repairs just got easier.

    Comprar Ahora
  5. Remove the six 6 mm Phillips #00 screws from the battery.
    • Remove the six 6 mm Phillips #00 screws from the battery.

  6. Lift the battery out of the laptop. Lift the battery out of the laptop.
    • Lift the battery out of the laptop.

  7. Remove two 3mm Phillips #00 screws from the fan.
    • Remove two 3mm Phillips #00 screws from the fan.

  8. Disconnect the fan cable by pulling it out of the motherboard socket. Disconnect the fan cable by pulling it out of the motherboard socket.
    • Disconnect the fan cable by pulling it out of the motherboard socket.

  9. Lift the fan upwards to remove it from the computer.
    • Lift the fan upwards to remove it from the computer.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ana Novo

Miembro Desde 14/02/18

305 Reputación

2 Guías creadas

Equipo

USF Tampa, Team S1-G4, Nance Spring 2018 Miembro de USF Tampa, Team S1-G4, Nance Spring 2018

USFT-NANCE-S18S1G4

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 14

Todo El Tiempo: 197