Saltar al contenido principal

HP Envy M6-1205DX Palm Rest Replacement

Qué necesitas

  1. HP Envy M6-1205DX Palm Rest Replacement, Battery: paso 1, imagen 1 de 1
    • Lay the device face down to begin.

  2. HP Envy M6-1205DX Palm Rest Replacement: paso 2, imagen 1 de 1
    • Slide the release mechanism to the left to release the battery.

  3. HP Envy M6-1205DX Palm Rest Replacement: paso 3, imagen 1 de 2 HP Envy M6-1205DX Palm Rest Replacement: paso 3, imagen 2 de 2
    • Remove the battery.

  4. HP Envy M6-1205DX Palm Rest Replacement, Back Panel: paso 4, imagen 1 de 1
    • Using a Phillips #1 screwdriver, remove the 8.6 mm screw.

  5. HP Envy M6-1205DX Palm Rest Replacement: paso 5, imagen 1 de 1
    • Slide the center panel down to remove it.

  6. HP Envy M6-1205DX Palm Rest Replacement, Palm Rest: paso 6, imagen 1 de 1
    • Set the computer facing upwards again.

    • Using the plastic opening tool gently pry the keyboard up.

  7. HP Envy M6-1205DX Palm Rest Replacement: paso 7, imagen 1 de 3 HP Envy M6-1205DX Palm Rest Replacement: paso 7, imagen 2 de 3 HP Envy M6-1205DX Palm Rest Replacement: paso 7, imagen 3 de 3
    • Flip the white tab on the large ribbon cable upward. Gently pull the large ribbon cable out to remove it.

    • Gently pull the small ribbon cable out to remove it.

  8. HP Envy M6-1205DX Palm Rest Replacement: paso 8, imagen 1 de 3 HP Envy M6-1205DX Palm Rest Replacement: paso 8, imagen 2 de 3 HP Envy M6-1205DX Palm Rest Replacement: paso 8, imagen 3 de 3
    • Gently pull the tension cable to remove it.

    • Gently pull the tension cable to remove it.

  9. HP Envy M6-1205DX Palm Rest Replacement: paso 9, imagen 1 de 1
    • Using a Phillips #1 screwdriver, remove the four 5.6 mm silver screws.

  10. HP Envy M6-1205DX Palm Rest Replacement: paso 10, imagen 1 de 2 HP Envy M6-1205DX Palm Rest Replacement: paso 10, imagen 2 de 2
    • Use the plastic opening tool to loosen the palm rest from the frame.

    • Once you pry all of the snaps up lift off the palm rest.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ryan Hatton

Miembro Desde 11/16/19

634 Reputación

5 Guías creadas

Equipo

IUPUI, Team S2-G2, Wilson Fall 2019 Miembro de IUPUI, Team S2-G2, Wilson Fall 2019

IUPUI-WILSON-F19S2G2

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 5

Ultimos 30 días: 10

Todo El Tiempo: 288