Saltar al contenido principal

HP Envy 15-u001dx Hard Drive Replacement

Qué necesitas

  1. HP Envy 15-u001dx Hard Drive Replacement, HP Envy 15-u001dx Disassembly: paso 1, imagen 1 de 1
    • Remove the two no-slip covers on the rear, bottom side using spudger shown in top center of picture.

    • The two in the front do not have to be removed as there are no screws underneath them.

  2. HP Envy 15-u001dx Hard Drive Replacement: paso 2, imagen 1 de 1
    • Remove the two cover tabs towards center of the bottom as there are screws underneath them.

  3. HP Envy 15-u001dx Hard Drive Replacement: paso 3, imagen 1 de 1
    • Remove all fourteen 4.5 mm screws from the bottom using a Phillips #0 screwdriver. Each location is marked by a red circle in the picture.

  4. HP Envy 15-u001dx Hard Drive Replacement: paso 4, imagen 1 de 1
    • Separate the top cover by using a spudger to go around the sides freeing the inside latches.

    • Once the bottom is free, carefully open to the inside as there are two ribbons that connect your keyboard and touch pad to the top cover.

  5. HP Envy 15-u001dx Hard Drive Replacement: paso 5, imagen 1 de 2 HP Envy 15-u001dx Hard Drive Replacement: paso 5, imagen 2 de 2
    • Use the spudger to detach the two ribbons from their connectors.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

  6. HP Envy 15-u001dx Hard Drive Replacement, Hard Drive: paso 6, imagen 1 de 1
    • Gently remove hard drive from its connector.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Dakota Presley

Miembro Desde 10/05/16

885 Reputación

6 Guías creadas

Equipo

USF Tampa, Team 9-4, Lacy Fall 2016 Miembro de USF Tampa, Team 9-4, Lacy Fall 2016

USFT-LACY-F16S9G4

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 3

Ultimos 30 días: 23

Todo El Tiempo: 1,888