Introducción

This guide demonstrates how to safely remove and replace a damaged or malfunctioning keyboard. Following these steps should ensure a simple replacement for a keyboard that has experienced a spill, is missing keys, or otherwise does not function correctly.

Partes

No se requieren partes.

  1. Insert the plastic spudger between the keyboard and the housing.
    • Insert the plastic spudger between the keyboard and the housing.

    • Start at the corner.

  2. 4 tabs are located at the top of the keyboard, which lock it in place.
    • 4 tabs are located at the top of the keyboard, which lock it in place.

    • Pry and twist the spudger along the top of the keyboard until each tab is released.

    • Pull back the keyboard from the top.

    • Be mindful of the fragile cables behind it.

    • Flip up the connecting flap on each of the three ribbon cables.

    • Remove each of the three cables by gently pulling them from their respective connectors.

    • Remove the keyboard from the housing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Lauren Vance

Miembro Desde 31/10/18

253 Reputación

2 Guías creadas

Equipo

IUPUI, Team S1-G2, Harley Fall 2018 Miembro de IUPUI, Team S1-G2, Harley Fall 2018

IUPUI-HARLEY-F18S1G2

2 Miembros

2 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 14

Últimos 30 Días: 48

Todo El Tiempo: 65