Repara tus cosas Comunidad Tienda

HP Elite x2 1012 G2 Battery Replacement

Introducción

Batteries are often the first components to wear out in electronic devices and as a result are a common problem. A dead battery can be frustrating, but fortunately replacing the battery on the HP Elite x2 1012 G2 is quick and easy.

Qué necesitas

  1. HP Elite x2 1012 G2 Battery Replacement, Screen: paso 1, imagen 1 de 1

    • Make sure the device is turned off before starting.

    • Orient the device so the back is facing you, with the kickstand up.

    Editar

  2. HP Elite x2 1012 G2 Battery Replacement: paso 2, imagen 1 de 3 HP Elite x2 1012 G2 Battery Replacement: paso 2, imagen 2 de 3 HP Elite x2 1012 G2 Battery Replacement: paso 2, imagen 3 de 3

    • Remove the six 3mm Torx T5 screws underneath the kickstand.

    Editar

  3. HP Elite x2 1012 G2 Battery Replacement: paso 3, imagen 1 de 2 HP Elite x2 1012 G2 Battery Replacement: paso 3, imagen 2 de 2

    • Turn the device over so the screen is facing you.

    • Place a suction cup firmly onto a corner of the screen.

    • Lift up gently until you see the screen separate from the casing.

    • Repeat this process for all four corners.

    Editar

  4. HP Elite x2 1012 G2 Battery Replacement: paso 4, imagen 1 de 1

    • Lift the screen up and off of the device.

    • Pry each corner up first, otherwise you may damage or crack the screen.

    Editar

  6. HP Elite x2 1012 G2 Battery Replacement: paso 5, imagen 1 de 3 HP Elite x2 1012 G2 Battery Replacement: paso 5, imagen 2 de 3 HP Elite x2 1012 G2 Battery Replacement: paso 5, imagen 3 de 3

    • Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently.

    Editar

  7. HP Elite x2 1012 G2 Battery Replacement: paso 6, imagen 1 de 2 HP Elite x2 1012 G2 Battery Replacement: paso 6, imagen 2 de 2

    • Remove the screen by gently lifting it off of the device.

    Editar

  8. HP Elite x2 1012 G2 Battery Replacement, Battery: paso 7, imagen 1 de 1

    • Orient the device so that the battery is closest to you.

    • The battery is the large, black rectangle at the bottom of the device.

    Editar

  9. HP Elite x2 1012 G2 Battery Replacement: paso 8, imagen 1 de 2 HP Elite x2 1012 G2 Battery Replacement: paso 8, imagen 2 de 2

    • Remove all six Phillips 3 mm screws around the battery by rotating in the counterclockwise direction with a Phillips screwdriver.

    Editar

  10. HP Elite x2 1012 G2 Battery Replacement: paso 9, imagen 1 de 2 HP Elite x2 1012 G2 Battery Replacement: paso 9, imagen 2 de 2

    • Remove the battery's connector by pushing both sides of the tab towards yourself with a plastic opening tool.

    Editar

  11. HP Elite x2 1012 G2 Battery Replacement: paso 10, imagen 1 de 1

    • Lift the battery out of the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

13 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Andy Velazquez

Miembro Desde 04/18/18

314 Reputación

1 Guía escrita

Insignias: 9

+ 6 más insignias

Equipo

Cal Poly, Team S18-G5, Livingston Spring 2018 Miembro de Cal Poly, Team S18-G5, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G5

4 Miembros

13 Guías creadas

4 comentarios

how do you test the battery? what voltage should it be maintaining?

scott kay - Contestar

Hi, after the replacement battery
toch not working, help pls?

Parsa Aghabeikzadeh - Contestar

PC not coming on, also not charging.

Abiola - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 17

Ultimos 7 días: 85

Ultimos 30 días: 422

Todo El Tiempo: 22,222