Repara tus cosas Comunidad Tienda

HP ENVY 5530 Front Panel Replacement

Introducción

The panel is what holds the screen in place. Before removing the panel make sure the printer is unplugged.

Qué necesitas

  1. HP ENVY 5530 Front Panel Replacement, Front Panel: paso 1, imagen 1 de 1

    • Lift up printer screen.

    Editar

  3. HP ENVY 5530 Front Panel Replacement: paso 2, imagen 1 de 3 HP ENVY 5530 Front Panel Replacement: paso 2, imagen 2 de 3 HP ENVY 5530 Front Panel Replacement: paso 2, imagen 3 de 3

    • Use the Metal Spudger from the IFIXIT Toolkit to pry the left corner of the front panel.

    • Slowly pry the front panel by sliding the Metal Spudger along the border of the front panel.

    Editar

  4. HP ENVY 5530 Front Panel Replacement: paso 3, imagen 1 de 2 HP ENVY 5530 Front Panel Replacement: paso 3, imagen 2 de 2

    • Remove the front panel by lifting each corner up.

    • Replace the front panel.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Elizabeth Surface

Miembro Desde 08/26/15

1,465 Reputación

9 Guías creadas

Insignias: 16

+ 13 más insignias

Equipo

USF Tampa, Team 4-6, Meier Fall 2015 Miembro de USF Tampa, Team 4-6, Meier Fall 2015

USFT-MEIER-F15S4G6

4 Miembros

18 Guías creadas

3 comentarios

My HP Envy 5530 had a screw hidden beneath the label on the right side of the front panel. I used a knife to lift the label to access the screw.

rndymike - Contestar

Is the front panel from a 5532 compatible with the Envy 5530?

Armando Pagan - Contestar

Wish I would have seen the comment about the screw… fix your post… at least protect others from making the same mistake

Azpatch - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 6

Ultimos 30 días: 33

Todo El Tiempo: 1,973