Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully flip the device over so that the bottom is facing up.
-
Slide both of the latches to the left.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a J1 screwdriver to remove each screw on the bottom of the computer. This will allow for the opening of the laptop to gain access to the fan.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Now that you have unscrewed most of the bottom of the laptop, carefully flip it back over.
-
Press down firmly on the four latches shown in the photo to detach the key board. This will unlock the latches holding the keyboard down, doing this will grant you access to the inside of the computer.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the keyboard carefully now that it is detached, and use the pry tool to assist you in the removal of the keyboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Now your laptop should have no screws and no keyboard.
-
You should now be able to open up the base of the laptop. With a bit of force, detach the sides latches of the base by pulling them open carefully.
-
Your computer should now look like the provided photo, where you can see where the fan is located.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Continue to unscrew all screws to completely disassemble to gain complete access to the computer's fan.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
As an extra precaution, please check for any dirt or debris that are preventing the fans complete functionality.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
Equipo
Texas Tech, Team S13-G4, Bennett Spring 2017 Miembro de Texas Tech, Team S13-G4, Bennett Spring 2017
TTU-BENNETT-S17S13G4
5 Miembros
5 Guías creadas
