Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Loosen the two 1.5 cm Phillips #1 screws that attach the cover of the hard drive .
-
Lift up the cover.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Loosen the 1.5 cm Phillips #1 screw attaching the hard drive to the laptop.
-
Locate the tab on the hard drive.
-
Use this tab to pull the hard drive toward the right side of the case.
-
Remove the hard drive.
-