Saltar al contenido principal

Introducción

In this guide, we will illustrate how to remove and replace the hard drive for this device. Tools required include thumbs and a Phillips screwdriver.

  1. Loosen the two 1.5 cm Phillips #1 screws that attach the cover of the hard drive . Lift up the cover.
    • Loosen the two 1.5 cm Phillips #1 screws that attach the cover of the hard drive .

    • Lift up the cover.

  2. Loosen the 1.5 cm Phillips #1 screw attaching the hard drive to the laptop. Locate the tab on the hard drive. Use this tab to pull the hard drive toward the right side of the case.
    • Loosen the 1.5 cm Phillips #1 screw attaching the hard drive to the laptop.

    • Locate the tab on the hard drive.

    • Use this tab to pull the hard drive toward the right side of the case.

    • Do not pull up on the tab!

    • Remove the hard drive.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Tyler Fricks

Miembro Desde 22/10/15

522 Reputación

5 Guías creadas

Equipo

Montana Tech, Team 3-2, Shirk Fall 2015 Miembro de Montana Tech, Team 3-2, Shirk Fall 2015

MTUM-SHIRK-F15S3G2

5 Miembros

5 Guías creadas

Un Comentario

Good info we are getting here. keep up!

Isaac Kamwathi - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 10

Ultimos 30 días: 30

Todo El Tiempo: 3,568