Saltar al contenido principal

Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.

Qué necesitas

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 2 : paso 1, imagen 2 de 2
    • Flip the computer over so the backside is facing you.

    • Using the two prongs that are located in the back, slide the further left prong and the upper right prong to the left as indicated in the image.

    • Slide the battery out.

  2. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 1
    • Look for tabs in between esc and f1, f4 and f5, f8 and f9, f12 and scroll.

    • Pull these tabs towards you.

  3. Este paso está sin traducir. Ayuda a traducirlo

    : paso 3, imagen 1 de 2 : paso 3, imagen 2 de 2
    • Flip the laptop over and on the back of the center of the keyboard there is a screw with a rectangle beside it that looks like a keyboard. Remove this Phillips 5mm screw and another similar screw in the back top left of the keyboard.

    • Then carefully lift the keyboard out of place with your fingernails or a plastic opening tool.

  4. Este paso está sin traducir. Ayuda a traducirlo

    : paso 4, imagen 1 de 3 : paso 4, imagen 2 de 3 : paso 4, imagen 3 de 3
    • There will be a metallic film attached to the keyboard from the motherboard. A black latch runs along the film keeping it in place. Lift the latch and detach the film; remove it to fully remove the keyboard.

  5. Este paso está sin traducir. Ayuda a traducirlo

    : paso 5, imagen 1 de 3 : paso 5, imagen 2 de 3 : paso 5, imagen 3 de 3
    • Carefully undo the white film the same way you took out the metallic film

    • Once this film is removed the bar with the power button and media tools above the keyboard will pop out of place using a spudger.

  6. Este paso está sin traducir. Ayuda a traducirlo

    : paso 6, imagen 1 de 2 : paso 6, imagen 2 de 2
    • Underneath, a metal clamp will be revealed with two Torx Security T7 17mm screws. Unscrew these.

    • Carefully lift the cable out of place that is to the right of it.

  7. Este paso está sin traducir. Ayuda a traducirlo

    : paso 7, imagen 1 de 2 : paso 7, imagen 2 de 2
    • Unscrew these two JIS #1 5mm screws on the fan.

    • Carefully unplug the fans' wires.

    • Remove the fan and put in new one.

  8. Este paso está sin traducir. Ayuda a traducirlo

    : paso 8, imagen 1 de 3 : paso 8, imagen 2 de 3 : paso 8, imagen 3 de 3
    • Push the CD drive out using your finger.

Linea de Meta

Una persona más ha completado esta guía.

Joseph Noudom

Miembro Desde 03/01/18

569 Reputación

4 Guías creadas

Equipo

Un comentario

I don’t know why these instructions are suggested but this is how you actually remove the disc drive. https://www.youtube.com/watch?v=gTvAt3Nn...

Cretien - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 7

Ultimos 30 días: 18

Todo El Tiempo: 548