Repara tus cosas Comunidad Tienda

HP Compaq 2510p RAM Replacement

Introducción

This guide requires only two screws to be removed with Phillips head screwdriver. Once the panel is removed, the ram can easily be pulled out.

Qué necesitas

  1. HP Compaq 2510p RAM Replacement, RAM: paso 1, imagen 1 de 1

    • Flip the device over so the back panel is facing upwards. Locate the RAM plate cover towards the left side of the laptop. There will be two screws located on the panel.

    Editar

  2. HP Compaq 2510p RAM Replacement: paso 2, imagen 1 de 1

    • Remove both screws holding the RAM cover plate in place using your Phillips Screwdriver.

    Editar

  4. HP Compaq 2510p RAM Replacement: paso 3, imagen 1 de 1

    • Remove the cover plate by lifting upwards once screws are removed.

    Editar

  5. HP Compaq 2510p RAM Replacement: paso 4, imagen 1 de 1

    • Carefully release the pins that are securing the RAM in place by pushing in a outward motion, away from the RAM.

    • Be sure to ground yourself before touching the RAM.

    • Be gentle when releasing the pins.

    Editar

  6. HP Compaq 2510p RAM Replacement: paso 5, imagen 1 de 1

    • Remove the old RAM by lifting it upwards, then pulling.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Nathan Pereira

Miembro Desde 10/26/16

57 Reputación

1 Guía escrita

Insignias: 5

+ 2 más insignias

Equipo

UMass Dartmouth, Team 3-8, Isaacson Fall 2016 Miembro de UMass Dartmouth, Team 3-8, Isaacson Fall 2016

UMASSD-ISAACSON-F16S3G8

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 761