Repara tus cosas Comunidad Tienda

HP Compaq 2510p Power/audio bar Replacement

Introducción

This guide will show step-by-step instruction depicting the replacement of your laptops power/audio bar.

Qué necesitas

  1. HP Compaq 2510p Power/audio bar Replacement, Power/audio bar: paso 1, imagen 1 de 1

    • Locate the 4 screws in the four corners of the laptop screen.

    • The screws may be hidden underneath a small rubber pad.

    • Be sure to ground yourself and tools before working near electronics.

    Editar

  2. HP Compaq 2510p Power/audio bar Replacement: paso 2, imagen 1 de 1

    • Use a Flathead screwdriver to remove the 4 rubber covers over the 4 screws referenced in step 1.

    Editar

  3. HP Compaq 2510p Power/audio bar Replacement: paso 3, imagen 1 de 1

    • Once the rubber has been removed a screw will be revealed. Remove each of the four screws with your Philips head screwdriver.

    Editar

  4. HP Compaq 2510p Power/audio bar Replacement: paso 4, imagen 1 de 1

    • Insert your spudger along the top of the screen, separating the plastic cover and the screen

    Editar

  6. HP Compaq 2510p Power/audio bar Replacement: paso 5, imagen 1 de 1

    • Continue running your Flathead along the top of the screen until the top is completely separated.

    Editar

  7. HP Compaq 2510p Power/audio bar Replacement: paso 6, imagen 1 de 2 HP Compaq 2510p Power/audio bar Replacement: paso 6, imagen 2 de 2

    • Pull the plastic covering of the screen towards the keyboard, exposing the inner workings of the screen.

    Editar

  8. HP Compaq 2510p Power/audio bar Replacement: paso 7, imagen 1 de 1

    • Locate the hinges at the bottom left, and right of the screen

    Editar

  9. HP Compaq 2510p Power/audio bar Replacement: paso 8, imagen 1 de 2 HP Compaq 2510p Power/audio bar Replacement: paso 8, imagen 2 de 2

    • Separate the Power/Audio bar from the hinge by gently pulling.

    Editar

  10. HP Compaq 2510p Power/audio bar Replacement: paso 9, imagen 1 de 1

    • Flip the Power/Audio bar over exposing the ribbon wire and its connection to the Power/Audio bar.

    Editar

  11. HP Compaq 2510p Power/audio bar Replacement: paso 10, imagen 1 de 1

    • Separate the ribbon wire by gently pulling the wire from its socket.

    • The wire will be separated and the bar is free.

    • Be gentle as you pull.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 2 otros colaboradores

Derek Kohansky

Miembro Desde 10/26/16

297 Reputación

2 Guías creadas

Insignias: 6

+ 3 más insignias

Equipo

UMass Dartmouth, Team 3-8, Isaacson Fall 2016 Miembro de UMass Dartmouth, Team 3-8, Isaacson Fall 2016

UMASSD-ISAACSON-F16S3G8

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 11

Todo El Tiempo: 375