Saltar al contenido principal

Introducción

Replace a cracked or faulty display on your HP Chromebook 14.

  1. Pry up the nylon covers at the lower left and right of the display to reveal two Phillips head screws. Pry up the nylon covers at the lower left and right of the display to reveal two Phillips head screws. Pry up the nylon covers at the lower left and right of the display to reveal two Phillips head screws.
    • Pry up the nylon covers at the lower left and right of the display to reveal two Phillips head screws.

  2. Remove the two screws. Remove the two screws.
    • Remove the two screws.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Be careful when prying not to damage the bezel. Use a spudger or other pry tool to pry up the bezel from all sides. Once all the clips are free, pull the bezel from the bottom.
    • Be careful when prying not to damage the bezel.

    • Use a spudger or other pry tool to pry up the bezel from all sides.

    • Once all the clips are free, pull the bezel from the bottom.

  5. Remove the four screws securing the display panel.
    • Remove the four screws securing the display panel.

  6. Let the display panel rest on the keyboard.
    • Let the display panel rest on the keyboard.

    • The highlighted area is taped to the back of the display panel. Pry up to free it.

    • Be careful not to damage the connector—pull it back gently to disconnect.

Conclusión

To reassemble your device, follow these instructions in reverse order.

23 personas más completaron esta guía.

Mario

Miembro Desde 24/03/14

652 Reputación

1 Guía escrita

Equipo

TechTucson WeFixThat Miembro de TechTucson WeFixThat

Community

2 Miembros

4 Guías creadas

Nylon covers are hard to see, they cover the entire area and peel off like a sticker, I didn't think mine had any and I pulled the screw socket out, not disastrous but I would have liked to have not done this.

madornetto - Contestar

Any idea where I can buy some replacement ones?

mcaddie7 -

I was able to complete it successfully though right now I can't get the bezel quite flush down on the bottom left. One clip doesn't seem to want to go in so I'm not sure if the display cable is in the way or not. Will have to give it another look here after work but otherwise easy enough!

Aysha Springston - Contestar

So what's the screen model used in this video?, I have the same laptop

seunoresegun - Contestar

Where could I find a replacement part for the 2 nylon screw covers?

mcaddie7 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 12

Últimos 30 Días: 54

Todo El Tiempo: 13,132