Saltar al contenido principal

HP Beats Special Edition 15-p390nr Screen Replacement

Qué necesitas

  1. HP Beats Special Edition 15-p390nr Screen  Replacement, Screen: paso 1, imagen 1 de 1
    • Use metal spudger to pry the screen from the back panel.

    • Popping sounds are normal

    • Make sure device is turned off

  2. HP Beats Special Edition 15-p390nr Screen  Replacement: paso 2, imagen 1 de 1
    • Use the Phillips #0 screwdriver to remove the four screws around the screen.

  3. HP Beats Special Edition 15-p390nr Screen  Replacement: paso 3, imagen 1 de 2 HP Beats Special Edition 15-p390nr Screen  Replacement: paso 3, imagen 2 de 2
    • Unclip wire from the screen and lift screen to remove.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Un comentario

Just wondering where I can get the screen 🤦🏾‍♂️

Desmond Osborne - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 17

Todo El Tiempo: 2,302