Saltar al contenido principal
  1. Este paso está sin traducir. Ayuda a traducirlo

    Turn computer off before starting. Turn computer over and begin removing noticeable 8mm screws with a Phillips #0 screwdriver.
    • Turn computer off before starting.

    • Turn computer over and begin removing noticeable 8mm screws with a Phillips #0 screwdriver.

  2. Este paso está sin traducir. Ayuda a traducirlo

    Some screws may be hidden under a screw cover. Simply use a metal spudger to pop off the screw cover to unveil the hidden 8mm screw.
    • Some screws may be hidden under a screw cover.

    • Simply use a metal spudger to pop off the screw cover to unveil the hidden 8mm screw.

    • Screw cover may fly when removing.

  3. Este paso está sin traducir. Ayuda a traducirlo

    Once screws are removed you may now remove the optical drive. Remove the hidden 3mm screw in the optical drive port.
    • Once screws are removed you may now remove the optical drive.

    • Remove the hidden 3mm screw in the optical drive port.

  4. Este paso está sin traducir. Ayuda a traducirlo

    Remove the rubberized feet located on the left and right shoulder of the computer to uncover hidden 8mm screws. Popping noises are normal.
    • Remove the rubberized feet located on the left and right shoulder of the computer to uncover hidden 8mm screws.

    • Popping noises are normal.

    • The shoulder caps are removable. Underneath there are 2 additional screws.

  5. Este paso está sin traducir. Ayuda a traducirlo

    Flip computer over and wedge metal spudger along the computer to pop off keyboard panel Flip computer over and wedge metal spudger along the computer to pop off keyboard panel
    • Flip computer over and wedge metal spudger along the computer to pop off keyboard panel

  6. Este paso está sin traducir. Ayuda a traducirlo

    Unclip wires connected to the motherboard and remove keyboard from the device. 17 screws should be removed up to this point.
    • Unclip wires connected to the motherboard and remove keyboard from the device.

    • 17 screws should be removed up to this point.

  7. Este paso está sin traducir. Ayuda a traducirlo

    Remove screws from the motherboard.
    • Remove screws from the motherboard.

    • 11 screws should be removed from the motherboard

  8. Este paso está sin traducir. Ayuda a traducirlo

    Unclamp wire strips from motherboard.
    • Unclamp wire strips from motherboard.

  9. Este paso está sin traducir. Ayuda a traducirlo

    Detach by lifting the motherboard up and flip the motherboard over.
    • Detach by lifting the motherboard up and flip the motherboard over.

  10. Este paso está sin traducir. Ayuda a traducirlo

    Unclip wifi card for further procedures
    • Unclip wifi card for further procedures

  11. Este paso está sin traducir. Ayuda a traducirlo

    Remove the fan cable from the connector that connects to the motherboard.
    • Remove the fan cable from the connector that connects to the motherboard.

    • Pull straight out to avoid damage to connectors.

  12. Este paso está sin traducir. Ayuda a traducirlo

    Remove all three screws that hold the fan to the system board
    • Remove all three screws that hold the fan to the system board

  13. Este paso está sin traducir. Ayuda a traducirlo

    Lift and remove the fan from the top cover.
    • Lift and remove the fan from the top cover.

Linea de Meta

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 7

Ultimos 30 días: 31

Todo El Tiempo: 1,536