Repara tus cosas Comunidad Tienda

HP 8 1401 Power/ Volume Button Board Replacement

Introducción

This guide can help if your power or volume buttons are broken. The power/ volume board may not be completely attached to the control board so be careful when unhooking the clip.

Qué necesitas

  1. HP 8 1401 Power/ Volume Button Board Replacement, Back Panel: paso 1, imagen 1 de 1

    • Using a Torx T4 screwdriver, remove the four 5 mm screws on the back panel.

    Editar

  2. HP 8 1401 Power/ Volume Button Board Replacement: paso 2, imagen 1 de 1

    • Insert the tip of a plastic opening tool in the seam between the front and back panels.

    Editar

  4. HP 8 1401 Power/ Volume Button Board Replacement: paso 3, imagen 1 de 2 HP 8 1401 Power/ Volume Button Board Replacement: paso 3, imagen 2 de 2

    • Slide the plastic opening tool around all edges of the device until the back panel detaches.

    • Lift off the back panel.

    Editar

  5. HP 8 1401 Power/ Volume Button Board Replacement, Power/ Volume Button Board: paso 4, imagen 1 de 3 HP 8 1401 Power/ Volume Button Board Replacement, Power/ Volume Button Board: paso 4, imagen 2 de 3 HP 8 1401 Power/ Volume Button Board Replacement, Power/ Volume Button Board: paso 4, imagen 3 de 3
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Disconnect the power/ volume button board from the control board by pulling the ribbon cable out of the white connector. You can use tweezers or your fingers.

    Editar

  6. HP 8 1401 Power/ Volume Button Board Replacement: paso 5, imagen 1 de 1

    • After removing the power/ volume button board, it should look like this.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 2

Todo El Tiempo: 162