Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the laptop so you can see the serial number and the four 7mm screws in all the corners.
-
Click the hinges by pushing them inward, which are located at the top of the laptop.
-
Remove the battery by pulling it out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two pieces of black tape that are each covering a 7mm screw at the top corners of the laptop.
-
Remove the fourteen 7mm JIS #1 screws.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the bottom cover of the laptop with a metal spudger by wedging the sides first and going all around.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the blue ends of the white ribbon cable by pulling the blue ends out of the connector.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the black rubber cover containing the hard drive by lifting the right side of the rubber cover.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.