Saltar al contenido principal

HP 15-da0002dx SSD Replacement

Qué necesitas

  1. HP 15-da0002dx SSD Replacement, Back Cover: paso 1, imagen 1 de 1
    • Make sure the computer is completely turned off.

    Your instructions worked perfectly. My machine had a 1 TB sata drive 5400 rpm and I replaced it with a Kingston ssd and cloned it prior to installing. Works perfectly.

    The rubber feet on the computer cracked but was able to stick them back on. May need to be glued if they come off. Thank You, Irwin

    Irwin - Contestar

  2. HP 15-da0002dx SSD Replacement: paso 2, imagen 1 de 1
    • Turn over the laptop.

    • The HP label should be touching the table and the bottom cover should be facing up.

  3. HP 15-da0002dx SSD Replacement: paso 3, imagen 1 de 2 HP 15-da0002dx SSD Replacement: paso 3, imagen 2 de 2
    • Two plastic feet are located on adjacent sides of the back cover.

    • Peel back the plastic feet using the plastic opening tools.

    thanks for posting this writeup. something to take not of, is the rubber strippings (feet) are of two different sizes

    - the thicker rubber strip goes on the back side

    - the thinner rubber strip goes on/towards the front

    chrisrjones1983 - Contestar

  4. HP 15-da0002dx SSD Replacement: paso 4, imagen 1 de 1
    • Using the Phillips #1 screwdriver, unscrew the eleven 9.0 mm screws holding the back cover in place.

  5. HP 15-da0002dx SSD Replacement: paso 5, imagen 1 de 1
    • Carefully flip over the computer so the HP label is now facing the ceiling.

  6. HP 15-da0002dx SSD Replacement: paso 6, imagen 1 de 2 HP 15-da0002dx SSD Replacement: paso 6, imagen 2 de 2
    • Open the screen.

    • Run the plastic opening tools along the edge of the back cover. Do this until the back cover becomes loose.

  7. HP 15-da0002dx SSD Replacement: paso 7, imagen 1 de 1
    • Close the screen and flip over the laptop. Using the plastic opening tools, gently take off the back cover starting from the middle, bottom edge.

  8. HP 15-da0002dx SSD Replacement, Battery: paso 8, imagen 1 de 1
    • Remove the screws holding the battery in place using a Phillips #1 screwdriver.

    I put my m.2 but i didn't remove the battery before and when I opened my laptop the m.2 wasn't showed on (my computer)

    Ali Hamdi - Contestar

  9. HP 15-da0002dx SSD Replacement: paso 9, imagen 1 de 2 HP 15-da0002dx SSD Replacement: paso 9, imagen 2 de 2
    • Using your fingers, tilt the top part of the battery towards you.

    • Continue to pull the rest of the battery away from the mounting tabs to remove.

  10. HP 15-da0002dx SSD Replacement, SSD: paso 10, imagen 1 de 1
    • Remove the screw holding the SSD in place using the Phillips #1 screwdriver.

    Is there a way to add a HDD by the DVD drive and battery (the empty spot that looks like it could fit a 2.5” SATA drive but needs soldering)?

    Lazùn Stargate - Contestar

  11. HP 15-da0002dx SSD Replacement: paso 11, imagen 1 de 1
    • Carefully pull the SSD away from the socket.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Un comentario

sir

can we add a hdd of 1tb also without replacing ssd???

Kranti Ajit - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 7

Ultimos 30 días: 23

Todo El Tiempo: 2,000