Saltar al contenido principal

HP 15-ay103dx Motherboard Replacement

Qué necesitas

  1. HP 15-ay103dx Motherboard  Replacement, Battery: paso 1, imagen 1 de 1
    • Slide the two battery lock latches on the back of the device to the “unlock” position.

  2. HP 15-ay103dx Motherboard  Replacement: paso 2, imagen 1 de 1
    • Lift the battery upward to remove it from the device.

  3. HP 15-ay103dx Motherboard  Replacement, Back Panel: paso 3, imagen 1 de 1
    • Using the PH1 phillips-head screwdriver, remove all the 5/16 in. screws from the back of the device.

    • There should be 10 in total, be sure to keep them together!

  4. HP 15-ay103dx Motherboard  Replacement: paso 4, imagen 1 de 1
    • Locate the optical disc drive and remove it from the device by sliding it straight of the device.

  5. HP 15-ay103dx Motherboard  Replacement: paso 5, imagen 1 de 2 HP 15-ay103dx Motherboard  Replacement: paso 5, imagen 2 de 2
    • Covering the hinges of the device are rubber bumpers secured to the device using adhesive. Remove them carefully.

    • Place the adhesive side up as you will need to place them back after your replacement is complete.

  6. HP 15-ay103dx Motherboard  Replacement: paso 6, imagen 1 de 2 HP 15-ay103dx Motherboard  Replacement: paso 6, imagen 2 de 2
    • In the same spot you’ve just removed the bumpers from, you will find two 5/16 in. screws. Using the same Phillips-head screwdriver used in step 2, remove the screws

    • Be sure to keep the screws together!

  7. HP 15-ay103dx Motherboard  Replacement: paso 7, imagen 1 de 1
    • Carefully remove the back panel from the device.

    • If you are unable to do this with your hands, you can use a thin prying tool of your choice to make it easier!

  8. HP 15-ay103dx Motherboard  Replacement, Motherboard: paso 8, imagen 1 de 3 HP 15-ay103dx Motherboard  Replacement, Motherboard: paso 8, imagen 2 de 3 HP 15-ay103dx Motherboard  Replacement, Motherboard: paso 8, imagen 3 de 3
    • Disconnect the wires around the motherboard securing it to the device.

    • To do this, flip the black "switches" securing the wires into place upwards.

  9. HP 15-ay103dx Motherboard  Replacement: paso 9, imagen 1 de 1
    • Remove the six 5/16 in. screws holding the motherboard onto the device using the P1 philips-head screwdriver.

    • Be sure to keep them together!

  10. HP 15-ay103dx Motherboard  Replacement: paso 10, imagen 1 de 3 HP 15-ay103dx Motherboard  Replacement: paso 10, imagen 2 de 3 HP 15-ay103dx Motherboard  Replacement: paso 10, imagen 3 de 3
    • Disconnect the wire securing the whole motherboard located at the top to the motherboard.

    • This is possible with your fingers, but is easier to do using an iFixit opening tool.

  11. HP 15-ay103dx Motherboard  Replacement: paso 11, imagen 1 de 1
    • Carefully lift the motherboard to remove it from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 17

Todo El Tiempo: 1,592