Partes

No se requieren partes.

  1. The first step you should take is to turn the laptop off.
    • The first step you should take is to turn the laptop off.

    • Next you want to get the prying tool and wedge it into the seam of the screen and outer casing.

  2. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  3. Once it is wedged in on one of the upper corners you want to gently lift and slide the tool down the sides and top of the seam until the frame pops off. Continue moving the tool down, while wedged, to release the grasp. You will be left with just the screen in the casing.
    • Once it is wedged in on one of the upper corners you want to gently lift and slide the tool down the sides and top of the seam until the frame pops off.

    • Continue moving the tool down, while wedged, to release the grasp. You will be left with just the screen in the casing.

    • While prying off make sure you have a good grasp on the computer. You will know it is coming off due to the audible clicks

  4. Next, you will want to unscrew the Phillips PM2.0×5.2 screws at the top of the screen with the #0 bit,  this will allow the screen to pop off easily. Once all the screws are removed, gently remove the screen from the outer casing.
    • Next, you will want to unscrew the Phillips PM2.0×5.2 screws at the top of the screen with the #0 bit, this will allow the screen to pop off easily.

    • Once all the screws are removed, gently remove the screen from the outer casing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Nicole Mathieu

Miembro Desde 19/03/18

557 Reputación

5 Guías creadas

Equipo

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 5

Todo El Tiempo: 119