Repara tus cosas Comunidad Tienda

HP 14-fq1025nr Screen Replacement

Introducción

In this guide, you will learn how to remove a HP 14-fq1025nr screen and replace it with a new one. The screen is used to display/output visual information such as a desktop, a document, or an application so that it can be seen by the user(s). A faulty screen may result in a large area of dead pixels (a pixel is a minute area of illumination on a screen) or a completely dead screen. For additional information and help with troubleshooting the screen, refer to our troubleshooting page.

Qué necesitas

  1. HP 14-fq1025nr Screen Replacement, Back Cover: paso 1, imagen 1 de 1

    • Flip the laptop upside down so the bottom cover is facing up.

    Editar

  2. HP 14-fq1025nr Screen Replacement: paso 2, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Use a pair of tweezers to grab and pull the feet off of the cover.

    Editar

  3. HP 14-fq1025nr Screen Replacement: paso 3, imagen 1 de 1

    • Remove the two 4 mm screws using a Phillips #0 screwdriver.

    • Remove the six remaining 6 mm screws located around the edges and underneath the feet using a Phillips #0 screwdriver.

    Editar

  5. HP 14-fq1025nr Screen Replacement: paso 4, imagen 1 de 1

    • Flip the laptop right-side up and slide an iFixit opening tool and/or Jimmy inside of the bottom cover seam to pry it open.

    Editar

  6. HP 14-fq1025nr Screen Replacement: paso 5, imagen 1 de 1

    • Remove the bottom cover.

    Editar

  7. HP 14-fq1025nr Screen Replacement, Screen: paso 6, imagen 1 de 3 HP 14-fq1025nr Screen Replacement, Screen: paso 6, imagen 2 de 3 HP 14-fq1025nr Screen Replacement, Screen: paso 6, imagen 3 de 3

    • Remove the four black 5 mm screws holding down the two silver screen hinges using a Phillips #00 screwdriver.

    Editar

  8. HP 14-fq1025nr Screen Replacement: paso 7, imagen 1 de 2 HP 14-fq1025nr Screen Replacement: paso 7, imagen 2 de 2

    • Unplug the screen from the motherboard by lifting the wire cover and removing the screen cord.

    • Separate the hinges from the computer.

    Editar

  9. HP 14-fq1025nr Screen Replacement: paso 8, imagen 1 de 1

    • Remove the screen.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Yasli Kanimba Murenzi

Miembro Desde 09/27/22

193 Reputación

2 Guías creadas

Insignias: 3

Equipo

Utah Tech University, Team 1-6, McMurrin Fall 2022 Miembro de Utah Tech University, Team 1-6, McMurrin Fall 2022

UTAHTECH-MCMURRIN-F22S1G6

3 Miembros

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 8

Todo El Tiempo: 252