Saltar al contenido principal

Introducción

The back panel is attached to the rest of the device by internal clips. In this guide you will separate these clips with the smallest plastic opening tool. This guide requires prying plastic pieces apart, please be gentle and use plastic tools.

Partes

No se especificaron partes.

  1. Identify the SD card port.
    • Identify the SD card port.

  2. Insert the smallest plastic opening tool into the SD card port. Gently pry until the back panel separates from the screen panel.
    • Insert the smallest plastic opening tool into the SD card port. Gently pry until the back panel separates from the screen panel.

    • Do not insert opening tool too far. Avoid making contact with the metal inside the port.

  3. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  4. Slide the opening tool along the seam between the back panel and the screen panel, prying the panels apart as you move around the edges.
    • Slide the opening tool along the seam between the back panel and the screen panel, prying the panels apart as you move around the edges.

  5. Separate the back panel from the rest of the device.
    • Separate the back panel from the rest of the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 8

Todo El Tiempo: 102