HKC P776A Screen Replacement - Guía de reparación iFixit

Qué necesitas

Paso 1 Separating Digitizer and Case

HKC P776A Screen Replacement, Separating Digitizer and Case: paso 1, imagen 1 de 1

Insert the plastic opening tool between the digitizer and the case.
Place the spudger in the gap created by the plastic opening tool to assist in separation.

Paso 2

HKC P776A Screen Replacement: paso 2, imagen 1 de 2

HKC P776A Screen Replacement: paso 2, imagen 2 de 2

Slide the spudger along the perimeter of the device to fully separate the two pieces.

Paso 3 Separating the Screen and Digitizer

HKC P776A Screen Replacement, Separating the Screen and Digitizer: paso 3, imagen 1 de 2

HKC P776A Screen Replacement, Separating the Screen and Digitizer: paso 3, imagen 2 de 2

Use your fingers to pop the screen out from the digitizer.

Paso 4 Removing the Optical Cord from the Motherbaord

HKC P776A Screen Replacement, Removing the Optical Cord from the Motherbaord: paso 4, imagen 1 de 1

With the plastic opening tool, lift the black latch up.

Paso 5

HKC P776A Screen Replacement: paso 5, imagen 1 de 1

Pull the optical cord out from the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Spencer Pheasant

Miembro Desde 01/20/15

301 Reputación

3 Guías creadas

+1 mas insignia

Equipo

USF Tampa, Team 7-6, Remmell Winter 2015 Miembro de USF Tampa, Team 7-6, Remmell Winter 2015

USFT-REMMELL-W15S7G6

3 Miembros

14 Guías creadas

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 8

Todo El Tiempo: 223