Repara tus cosas Comunidad Tienda

HKC P776A Digitizer Replacement

Qué necesitas

  1. HKC P776A Digitizer Replacement, Separating Digitizer and Case: paso 1, imagen 1 de 1

    • Insert the plastic opening tool between the digitizer and the case.

    • Place the spudger in the gap created by the plastic opening tool to assist in separation.

    Editar

  2. HKC P776A Digitizer Replacement: paso 2, imagen 1 de 2 HKC P776A Digitizer Replacement: paso 2, imagen 2 de 2

    • Slide the spudger along the perimeter of the device to fully separate the two pieces.

    Editar

  4. HKC P776A Digitizer Replacement, Separating the Screen and the Digitizer: paso 3, imagen 1 de 2 HKC P776A Digitizer Replacement, Separating the Screen and the Digitizer: paso 3, imagen 2 de 2

    • Use your fingers to pop the screen out from the digitizer.

    Editar

  5. HKC P776A Digitizer Replacement, Removing the Cable from the Motherboard: paso 4, imagen 1 de 2 HKC P776A Digitizer Replacement, Removing the Cable from the Motherboard: paso 4, imagen 2 de 2

    • Use the tip of the spudger to release the latches on the motherboard.

    Editar

  6. HKC P776A Digitizer Replacement: paso 5, imagen 1 de 1

    • Remove the cable from the motherboard.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Spencer Pheasant

Miembro Desde 01/20/15

301 Reputación

3 Guías creadas

Insignias: 4

+1 mas insignia

Equipo

USF Tampa, Team 7-6, Remmell Winter 2015 Miembro de USF Tampa, Team 7-6, Remmell Winter 2015

USFT-REMMELL-W15S7G6

3 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 133