GoPro Karma Harness Replacement - Guía de reparación iFixit

Únete a la Comunidad de Reparación - Crear Cuenta

Introducción

Replacing the harness for the GoPro camera is fairly easy. We will tell you how to remove the stabilizer which holds the harness, how to remove camera from the harness, and how to replace the harness itself.

Qué necesitas

1. Paso 1 Stabilizer
  Locate stabilizer collar’s unlock and lock symbols. Twist the collar counterclockwise to unlock the stabilizer from GoPro Karma body.
  
  Place the GoPro Karma on a stable surface with the legs folded in and the stabilizer facing towards yourself.
  Editar
  
  Pregunta a FixBot
  
  Agregar Comentario
  
  1024
2. Paso 2
  Remove the stabilizer by pulling the entire stabilizer out of the drone body.
  Editar
  
  Pregunta a FixBot
  
  Agregar Comentario
  
  1024
1. Paso 3 Harness
  Place finger on the tab to open the harness and remove the camera.
  
  Be sure to pull the camera straight out lest you damage the connectors.
  Editar
  
  Pregunta a FixBot
  
  Agregar Comentario
  
  1024
2. Paso 4
  Using a Hex 2.0mm screwdriver, remove the two 12 mm hex screws closest to the harness.
  Editar
  
  Pregunta a FixBot
  
  Agregar Comentario
  
  1024
3. Paso 5
  Pull the harness off of the stabilizer.
  
  Be sure to pull the harness straight off lest you damage the connector.
  Editar
  
  Pregunta a FixBot
  
  Agregar Comentario
  
  1024

Conclusión

To reassemble your device, follow these instructions in reverse order.

Cancelar: No complete esta guía.

Una persona más ha completado esta guía.

Autor

con 2 otros colaboradores

Max Verspieren

Miembro Desde 04/19/18

97 Reputación

1 Guía escrita

Equipo

Cal Poly, Team S25-G14, Maness Spring 2018 Miembro de Cal Poly, Team S25-G14, Maness Spring 2018

CPSU-MANESS-S18S25G14

Miembros de 4

72 Guías creadas

0Guía Comentarios

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 8

Ultimos 30 días: 24

Todo El Tiempo: 1,633