Saltar al contenido principal

GoPro Hero4 Silver Front Panel Replacement

Qué necesitas

  1. GoPro Hero4 Silver Front Panel Replacement, Front Panel: paso 1, imagen 1 de 3 GoPro Hero4 Silver Front Panel Replacement, Front Panel: paso 1, imagen 2 de 3 GoPro Hero4 Silver Front Panel Replacement, Front Panel: paso 1, imagen 3 de 3
    • Start by removing the silver plastic face from the camera using a plastic opening tool. Insert the plastic opening tool into the middle of each edge and lift up the tabs that keep the camera face on.

    • The seven plastic tab locations are marked in red.

    • Try using the plastic opening tool before switching to the metal spudger. We tried using the plastic opening tool to pry the camera face off, but found that it did not give us enough leverage.

    • There may be glue holding the camera face on to the housing. Be careful not to flex the camera face too much, or it will crack.

    First step should be make sure you remove memory card first. I accidentally left mine and broke it trying to remove the assembly from the case.

    Brad Hodgkinson - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

15 personas más completaron esta guía.

Zack Hoover

Miembro Desde 08/27/15

1,109 Reputación

3 Guías creadas

Equipo

USF Tampa, Team 2-1, Blackwell Fall 2015 Miembro de USF Tampa, Team 2-1, Blackwell Fall 2015

USFT-BLACKWELL-F15S2G1

4 Miembros

20 Guías creadas

2 comentarios

Am I mistaken, or are there missing steps in this guide?

Tom Fox - Contestar

Looks like a simple remove/replace guide. Only one step needed.

justincarver - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 8

Ultimos 30 días: 37

Todo El Tiempo: 11,314