Repara tus cosas Comunidad Tienda

GoPro Hero Motherboard Replacement

Qué necesitas

  1. GoPro Hero Motherboard Replacement, Casing: paso 1, imagen 1 de 1

    • Power off your GoPro before beginning disassembly.

    • Unclip the black latch to the camera case and open the case.

    Editar

  2. GoPro Hero Motherboard Replacement: paso 2, imagen 1 de 1

    • Gently pry the back open by inserting a metal spudger between the case and back panel.

    Editar

  3. GoPro Hero Motherboard Replacement: paso 3, imagen 1 de 1

    • Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.

    Editar

  5. GoPro Hero Motherboard Replacement: paso 4, imagen 1 de 1

    • Disconnect the ribbon cable from the lens by lifting the black latch and gently pulling the ribbon cable from the socket.

    Editar

  6. GoPro Hero Motherboard Replacement: paso 5, imagen 1 de 1

    • Use a Phillips screwdriver (PH000) to remove the four screws around the white plastic piece.

    • Make sure to keep track of these screws as they are very small.

    Editar

  7. GoPro Hero Motherboard Replacement: paso 6, imagen 1 de 1

    • Carefully remove the motherboard and white plastic piece from the case.

    Editar

  8. GoPro Hero Motherboard Replacement, Motherboard: paso 7, imagen 1 de 2 GoPro Hero Motherboard Replacement, Motherboard: paso 7, imagen 2 de 2

    • Remove the larger ribbon cable from the daughter board by lifting the black latch and pulling the ribbon cable gently from the socket.

    • Disconnect the smaller ribbon cable leading from the white plastic piece by simply pulling it from the socket.

    Editar

  9. GoPro Hero Motherboard Replacement: paso 8, imagen 1 de 2 GoPro Hero Motherboard Replacement: paso 8, imagen 2 de 2

    • Separate the white plastic piece from the motherboard.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Zoe Tuggle

Miembro Desde 04/01/15

179 Reputación

1 Guía escrita

Insignias: 9

+ 6 más insignias

Equipo

Cal Poly, Team 12-2, Lancaster Spring 2015 Miembro de Cal Poly, Team 12-2, Lancaster Spring 2015

CPSU-LANCASTER-S15S12G2

4 Miembros

18 Guías creadas

2 comentarios

So after doing all theses steps did it resolve the problem

Anita - Contestar

Thanks so much I really needed this guide.

Thanks, Sam

Sam Liam Matthews - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 8

Ultimos 30 días: 41

Todo El Tiempo: 10,094