Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unclip the black latch to the camera case and open the case.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently pry the back open by inserting a metal spudger between the case and back panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the ribbon cable from the lens by lifting the black latch and gently pulling the ribbon cable from the socket.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips screwdriver (PH000) to remove the four screws around the white plastic piece.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully remove the motherboard and white plastic piece from the case.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the larger ribbon cable from the daughter board by lifting the black latch and pulling the ribbon cable gently from the socket.
-
Disconnect the smaller ribbon cable leading from the white plastic piece by simply pulling it from the socket.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two screws located on each side of the board with a Phillips screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Separate the daughter board from the white plastic piece.
-
Cancelar: No complete esta guía.
5 personas más completaron esta guía.
4 comentarios
Wo kann ich ein daughterboard kaufen habt ihr da was für mich?
Terrific guide. Does anyone know where to buy the “daughter board”?
ide. Does anyone know where to buy the “daughter board”?
fedebossert - 05/27/20
<a href="https://www.w3schools.com/">Visit W3Schools.com!</a>