Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unclip the black latch to the camera case and open the case.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently pry the back open by inserting a metal spudger between the case and back panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the ribbon cable from the lens by lifting the black latch and gently pulling the ribbon cable from the socket.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips screwdriver (PH000) to remove the four screws around the white plastic piece.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully remove the motherboard and white plastic piece from the case.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the larger ribbon cable from the daughter board by lifting the black latch and pulling the ribbon cable gently from the socket.
-
Disconnect the smaller ribbon cable leading from the white plastic piece by simply pulling it from the socket.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Separate the motherboard from the white piece of plastic.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the ribbon cable from the motherboard by simply pulling the cable from the socket.
-
Cancelar: No complete esta guía.
5 personas más completaron esta guía.
3 comentarios
Where do you buy the replacement lcd
Gopro hero 7 white repair cost:
Screen: $45 - https://www.ebay.com.au/itm/183828969944
Side panel: $35 - https://www.herogear.com.au/genuine-repl...
I can find the screen but is it compatible with the Hero+