Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

GoPro Hero LCD Screen Replacement

Qué necesitas

  1. GoPro Hero LCD Screen Replacement, Casing: paso 1, imagen 1 de 1
    • Power off your GoPro before beginning disassembly.

    • Unclip the black latch to the camera case and open the case.

  2. GoPro Hero LCD Screen Replacement: paso 2, imagen 1 de 1
    • Gently pry the back open by inserting a metal spudger between the case and back panel.

  3. GoPro Hero LCD Screen Replacement: paso 3, imagen 1 de 1
    • Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.

  4. GoPro Hero LCD Screen Replacement: paso 4, imagen 1 de 1
    • Disconnect the ribbon cable from the lens by lifting the black latch and gently pulling the ribbon cable from the socket.

  5. GoPro Hero LCD Screen Replacement: paso 5, imagen 1 de 1
    • Use a Phillips screwdriver (PH000) to remove the four screws around the white plastic piece.

    • Make sure to keep track of these screws as they are very small.

  6. GoPro Hero LCD Screen Replacement: paso 6, imagen 1 de 1
    • Carefully remove the motherboard and white plastic piece from the case.

  7. GoPro Hero LCD Screen Replacement, LCD Screen: paso 7, imagen 1 de 2 GoPro Hero LCD Screen Replacement, LCD Screen: paso 7, imagen 2 de 2
    • Remove the larger ribbon cable from the daughter board by lifting the black latch and pulling the ribbon cable gently from the socket.

    • Disconnect the smaller ribbon cable leading from the white plastic piece by simply pulling it from the socket.

  8. GoPro Hero LCD Screen Replacement: paso 8, imagen 1 de 1
    • Separate the motherboard from the white piece of plastic.

  9. GoPro Hero LCD Screen Replacement: paso 9, imagen 1 de 1
    • Remove the ribbon cable from the motherboard by simply pulling the cable from the socket.

  10. GoPro Hero LCD Screen Replacement: paso 10, imagen 1 de 2 GoPro Hero LCD Screen Replacement: paso 10, imagen 2 de 2
    • Separate the LCD screen from the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

River Drake

Miembro Desde 04/02/15

1,023 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 12-2, Lancaster Spring 2015 Miembro de Cal Poly, Team 12-2, Lancaster Spring 2015

CPSU-LANCASTER-S15S12G2

4 Miembros

18 Guías creadas

3 comentarios

Where do you buy the replacement lcd

Anthony Volatile - Contestar

I can find the screen but is it compatible with the Hero+

Brian Casado - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 9

Ultimos 7 días: 56

Ultimos 30 días: 197

Todo El Tiempo: 22,191