Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unclip the black latch to the camera case and open the case.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently pry the back open by inserting a metal spudger between the case and back panel.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.
-
Use a plastic spudger to pry the battery off from the white plastic piece underneath.
-
Cancelar: No complete esta guía.
27 personas más completaron esta guía.
20 comentarios
Very good tutorial thank you. But I can also find no place to buy a new battery... But here is a petition to make Gopro sell spare parts: https://www.change.org/p/gopro-support-o...
I followed these steps and inadvertently pulled not only the battery plug but its adapter (housing) at the same time. Now I can't plug the battery back in because there's no place to plug it! Contacting GoPro they stressed that the battery is not intended for removal.
Awesome! Could you also show us how to put in a new battery, how do i prep my battery? What type of a battery can i use ? Thanks a lot !!