Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
Are the circuits of your GoPro's motherboard fried from water damage? This guide provides steps on how to replace a GoPro Hero 3+ Silver Motherboard and get your camera back in working condition.
Qué necesitas
-
-
Push the tab on the back of the device left to remove the plate covering the battery.
-
-
-
Insert a plastic opening tool in between the front face plate and the black housing.
-
-
-
-
Locate the four 8.1mm PH00 screws on the corners of the GoPro and unscrew them using the phillips screwdriver.
-
Gently remove the motherboard by using a plastic opening tool to pry it out of the housing.
-
-
-
Remove the single 3.2mm PH00 screw with your screwdriver to detach the motherboard from the mid frame.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
3 personas más completaron esta guía.