Saltar al contenido principal

GoPro Hero+ LCD Back Panel Disassembly

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. GoPro Hero+ LCD Back Panel Disassembly, Back Panel: paso 1, imagen 1 de 2 GoPro Hero+ LCD Back Panel Disassembly, Back Panel: paso 1, imagen 2 de 2
    • Be sure to power off the GoPro before you start disassembly.

    • Pop up and pull back on the clip to remove the screen cover and expose the back panel with the touchscreen.

  2. GoPro Hero+ LCD Back Panel Disassembly: paso 2, imagen 1 de 2 GoPro Hero+ LCD Back Panel Disassembly: paso 2, imagen 2 de 2
    • Use the metal spudger to pry around the perimeter of the panel.

    • Pry the panel upwards by inserting the metal spudger into the corner crease between the panel and camera shell.

  3. GoPro Hero+ LCD Back Panel Disassembly: paso 3, imagen 1 de 2 GoPro Hero+ LCD Back Panel Disassembly: paso 3, imagen 2 de 2
    • Pry around the panel to ensure it is not attached to the device.

    • Move the panel to the side so you can access the internal components.

    • The panel is still attached to the rest of the device with a ribbon cable, so be sure to not tear or damage the cable.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

USF Tampa, Team 2-4, Blackwell Fall 2015 Miembro de USF Tampa, Team 2-4, Blackwell Fall 2015

USFT-BLACKWELL-F15S2G4

4 Miembros

20 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 110