Introducción

Replace your dying GoPro battery with a fresh one. If you're ready to jump off a mountain, your battery should be too!

  1. Place your thumb on the indentation in the back case on the side of the GoPro. Gently press down with your thumb and lift the back cover away from the case to remove it.
    • Place your thumb on the indentation in the back case on the side of the GoPro.

    • Gently press down with your thumb and lift the back cover away from the case to remove it.

  2. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    ¿Alguna vez arreglaste algo? Eso es genial.

    Comparte tu historia de reparación con #SoyUnGenio

    Todos somos Genios

    Comparte tu historia de reparación con #SoyUnGenio

  3. Slide a plastic opening tool between the battery and the rear case. Gently pry the battery up and out of the rear case.
    • Slide a plastic opening tool between the battery and the rear case.

    • Gently pry the battery up and out of the rear case.

  4. Remove the battery from the case.
    • Remove the battery from the case.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

David Hodson

Miembro Desde 13/04/10

133,529 Reputación

127 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 33

Todo El Tiempo: 12,874