Repara tus cosas Comunidad Tienda

Gilbarco Fuel Dispenser Fuel Filter Replacement

Escrito Por: aimen alaina (y otro participante)
  • Comentarios: 0
  • Favoritos: 0

Dificultad

Muy fácil

Pasos

4

Tiempo Requerido

7 - 10 minutos

Secciones

1

Banderas

2

Action Shots

Fotos de acción

Sé un héroe de acción! Esta guía necesita imágenes que demuestren mejor cómo llevar a cabo acciones específicas.

Better Introduction

Mejor introducción

Mejora esta guía completando o revisando su introducción.

Introducción

Just like any other filter, a fuel filter requires replacing after so much use. Rather than paying someone, you can do it yourself with a couple steps and only a filter wrench.

Herramientas

Partes

No se especificaron partes.

  1. Remove the cover panel from the fuel dispenser. Remove the cover panel from the fuel dispenser. Remove the cover panel from the fuel dispenser.

    • Remove the cover panel from the fuel dispenser.

    Editar

  2. Using a filter wrench, twist counter-clockwise to remove the old filter. Using a filter wrench, twist counter-clockwise to remove the old filter. Using a filter wrench, twist counter-clockwise to remove the old filter.

    • Using a filter wrench, twist counter-clockwise to remove the old filter.

    Editar

  4. Once the filter has been removed, place the new filter over the housing and screw clock-wise to install. Once the filter has been removed, place the new filter over the housing and screw clock-wise to install. Once the filter has been removed, place the new filter over the housing and screw clock-wise to install.

    • Once the filter has been removed, place the new filter over the housing and screw clock-wise to install.

    Editar

  5. After the filter has been installed, reattach the panel cover and lock it in place. After the filter has been installed, reattach the panel cover and lock it in place.

    • After the filter has been installed, reattach the panel cover and lock it in place.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

aimen alaina

Miembro Desde 18/02/21

109 Reputación

1 Guía escrita

Insignias: 2

Equipo

University of Memphis, Team S50-G6, Willis Spring 2021 Miembro de University of Memphis, Team S50-G6, Willis Spring 2021

UM-WILLIS-S21S50G6

1 Miembro

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 19

Todo El Tiempo: 89