Ghost Longboard Wheel Replacement

Introducción

Use this guide to replace the damaged, warped, or dented wheels on your Ghost Longboard. This guide requires minimal skill and no prior experience. It is especially useful if your board is not as fast as it used to be, it has become more difficult to turn, or it does not coast for as long as you would like it to. the ghost longboard wheels are easy to replace.

Qué necesitas

Paso 1 Wheel

Ghost Longboard Wheel Replacement, Wheel: paso 1, imagen 1 de 1

Using a 15 mm socket wrench, unscrew the axle nut.

Editar

Paso 2

Using your fingers, remove the axle nut from the axle.

Editar

Paso 3

Remove the washer from the axle.

Editar

Paso 4

Remove the wheel from the axle.

Editar

Paso 5

Remove the second washer from the axle.

Editar

Paso 6

Slide a new washer onto the axle.

Editar

Paso 7

Place the new wheel on the axle.
Be sure to position the flat side of the wheel so it is facing inward.

Editar

Paso 8

Place a second washer on the axle exterior to the wheel.

Editar

Paso 9

Place an axle nut on the axle.

Editar

Paso 10

Using a 15 mm socket wrench, tighten the axle nut.
Be sure to tighten the axle nut enough to prevent the wheel from wobbling, but not so tight as to prohibit the wheel from spinning freely.

Editar