Saltar al contenido principal

Get clean cycle (button) to turn off

Qué necesitas

    • After performing a clean cycle, if the clean button does not go off, try to force the flush cycle as follows:

    • Take off the water canister.

    • Fill water canister with fresh water and set aside.

    • Without the water canister back on the coffee maker, press the lit up clean button one time briefly.

    • Wait for “Flush” or “lush” to appear on display (machine may beep a number of times as its trying to clean without the reservoir).

    • Put reservoir canister back in place and briefly press clean button.

    • Wait until end of this flush cycle – clean button should then go off.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Pat

Miembro Desde 02/28/22

133 Reputación

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 6

Todo El Tiempo: 178