Introducción

This guide is to replace the speaker located inside the phone base

  1. Unplug the device before proceeding.
    • Unplug the device before proceeding.

    • Remove the phone cord from the phone jack from the base of the headset.

      • Use a plastic opening tool to remove the phone cord.

    Agregar Comentario

  2. Remove the phone cord screw cap.
    • Remove the phone cord screw cap.

      • Unscrew the 7.5mm screw.

      • Remove the screw cap.

    • Remove the cord from the phone base.

    Agregar Comentario

    • Use finger to remove the battery cover.

    Agregar Comentario

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the Volume Dial by gently grasping the dial and pulling away from the base.

    Agregar Comentario

    • Remove the 6 screws from the base shell.

      • Remove the 3 12mm screws with the Philips head #1 screw driver.

      • Remove the 3 18mm screws with the Philips head #1 screw driver.

    Agregar Comentario

    • Pry off the base shell using a Plastic Opener Tool.

    Agregar Comentario

    • Slightly pull out speaker.

    • Cut wire as close as speaker as possible with wire cutters.

    • Remove speaker.

    Agregar Comentario

    • Strip the wire half an inch using wire strippers for a 24 gauge wire.

    Agregar Comentario

    • Solder on the new speaker.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 16-59, Forte Fall 2012 Miembro de Cal Poly, Team 16-59, Forte Fall 2012

CPSU-FORTE-F12S16G59

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 1,141