Saltar al contenido principal

Partes

No se especificaron partes.

  1. Flip phone over so its backside is facing up.
    • Flip phone over so its backside is facing up.

  2. Push from indentation and slide battery cover away from phone to remove battery cover.
    • Push from indentation and slide battery cover away from phone to remove battery cover.

  3. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  4. Hold battery upwards so you see “This side up”
    • Hold battery upwards so you see “This side up”

  5. Using a philips screwdriver, unscrew all 4 screws along the edge of the phone
    • Using a philips screwdriver, unscrew all 4 screws along the edge of the phone

  6. Using your plastic pry tool, slide the tool between the phone’s keypad cover and back cover. Using your plastic pry tool, slide the tool between the phone’s keypad cover and back cover.
    • Using your plastic pry tool, slide the tool between the phone’s keypad cover and back cover.

  7. You should be able to see the motherboard. Don’t separate the two covers. They should be held together by a screw at the axis of the phone.
    • You should be able to see the motherboard. Don’t separate the two covers. They should be held together by a screw at the axis of the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Jack Foley

Miembro Desde 25/04/13

28 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 13-62, Johann Spring 2013 Miembro de Cal Poly, Team 13-62, Johann Spring 2013

CPSU-JOHANN-S13S13G62

4 Miembros

12 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 276