Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
Resumen del Video
-
Este paso está sin traducir. Ayuda a traducirlo
-
This video is about repairing a broken damper doo rather than replacing the regulator assembly.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
All the steps are in the video but in general do the following.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Empty Fridge, remove the regulator at the top rear of the fridge, check and see if its a broken damper door. assuming it is remove the damper motor assembly with the broken door and use a heat gun to weld them back together. adjust the assembly as needed and replace the damper assembly and test.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.