Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Repairing Gateway no.mg1 Hdd locked

Qué necesitas

  1. Repairing Gateway no.mg1 Hdd locked, Battery: paso 1, imagen 1 de 1
    • Move the latch to the right of the battery to unlock.

  2. Repairing Gateway no.mg1 Hdd locked: paso 2, imagen 1 de 1
    • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

    • The latch must be held in position to remove the battery.

  3. Repairing Gateway no.mg1 Hdd locked, Hdd locked: paso 3, imagen 1 de 1
    • Before you begin, it's recommended that you back up all your computer's information on the original hard drive. Also, verify the laptop is off and all cables are disconnected.

    • Turn the laptop over so the bottom is facing up.

  4. Repairing Gateway no.mg1 Hdd locked: paso 4, imagen 1 de 2 Repairing Gateway no.mg1 Hdd locked: paso 4, imagen 2 de 2
    • Loosen the three Philips cover screws that secure the hard drive.

    • These screws cannot be fully removed from the hard drive cover.

    • Use the spudger to lift and to remove the hard drive cover.

  5. Repairing Gateway no.mg1 Hdd locked: paso 5, imagen 1 de 2 Repairing Gateway no.mg1 Hdd locked: paso 5, imagen 2 de 2
    • Slide the original hard drive to the left and lift it to remove.

    • Insert the new hard drive.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Diego Carteno

Miembro Desde 04/15/10

258 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 24-20, Regan Spring 2010 Miembro de Cal Poly, Team 24-20, Regan Spring 2010

CPSU-REGAN-S10S24G20

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 5

Ultimos 30 días: 12

Todo El Tiempo: 13,889