Saltar al contenido principal

Gateway SA1 Disk Drive Replacement

Qué necesitas

  1. Gateway SA1 Disk Drive Replacement, Battery: paso 1, imagen 1 de 1
    • Move the latch to the right of the battery to unlock.

  2. Gateway SA1 Disk Drive Replacement: paso 2, imagen 1 de 1
    • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

    • The latch must be held in position to remove the battery.

  3. Gateway SA1 Disk Drive Replacement, Disk Drive: paso 3, imagen 1 de 1
    • Unscrew the marked 5.9 mm Philips screw.

  4. Gateway SA1 Disk Drive Replacement: paso 4, imagen 1 de 1
    • Use the spudger to pry out the Disk dive.

  5. Gateway SA1 Disk Drive Replacement: paso 5, imagen 1 de 1
    • The disk drive should easily detach and can now be replaced.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Diego Carteno

Miembro Desde 04/15/10

258 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 24-20, Regan Spring 2010 Miembro de Cal Poly, Team 24-20, Regan Spring 2010

CPSU-REGAN-S10S24G20

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 3,446