Introducción

This Guide will help you replace a Gateway Disk Drive.

  1. Move the latch to the right of the battery to unlock.
    • Move the latch to the right of the battery to unlock.

  2. Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.
    • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

    • The latch must be held in position to remove the battery.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Unscrew the marked 5.9 mm Philips screw.
    • Unscrew the marked 5.9 mm Philips screw.

  5. Use the spudger to pry out the Disk dive.
    • Use the spudger to pry out the Disk dive.

  6. The disk drive should easily detach and can now be replaced.
    • The disk drive should easily detach and can now be replaced.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Diego Carteno

Miembro Desde 15/04/10

252 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 24-20, Regan Spring 2010 Miembro de Cal Poly, Team 24-20, Regan Spring 2010

CPSU-REGAN-S10S24G20

4 Miembros

7 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 3,190