Saltar al contenido principal

Introducción

To network card allows the device to access wireless networks. To access this part the rear cover will need to be removed.

Partes

No se especificaron partes.

  1. Push orange locking tab with spudger right,  until battery lifts out of place. Laptop should be unplugged from power supply before removal. Laptop should be unplugged from power supply before removal.
    • Push orange locking tab with spudger right, until battery lifts out of place.

    • Laptop should be unplugged from power supply before removal.

  2. Unscrew the two  7 mm long #0 Phillips screws.
    • Unscrew the two 7 mm long #0 Phillips screws.

  3. Lift and remove the cover panel via the indentation in the middle of the panel.
    • Lift and remove the cover panel via the indentation in the middle of the panel.

  4. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  5. Dislocate the white wire by pushing upward away from the network card.
    • Dislocate the white wire by pushing upward away from the network card.

  6. Dislocate the black wire by pushing upward away from the network card.
    • Dislocate the black wire by pushing upward away from the network card.

  7. Unscrew the 3 mm long #0 Phillips head screw.
    • Unscrew the 3 mm long #0 Phillips head screw.

  8. Pull the card outward to remove.
    • Pull the card outward to remove.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Aaron Allison

Miembro Desde 05/11/18

433 Reputación

5 Guías creadas

Equipo

IUPUI, Team S1-G1, Baechle Fall 2018 Miembro de IUPUI, Team S1-G1, Baechle Fall 2018

IUPUI-BAECHLE-F18S1G1

3 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 4

Todo El Tiempo: 61