Introducción

The rear panel will need to be removed to access parts such as the hard drive and network card.

Partes

No se requieren partes.

  1. Push orange locking tab with spudger right,  until battery lifts out of place.
    • Push orange locking tab with spudger right, until battery lifts out of place.

      • Laptop should be unplugged from power supply before removal.

  2. Unscrew the two  7 mm long #0 Phillips screws.
    • Unscrew the two 7 mm long #0 Phillips screws.

    • Lift and remove the cover panel via the indentation in the middle of the panel.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Aaron Allison

Miembro Desde 05/11/18

433 Reputación

5 Guías creadas

Equipo

IUPUI, Team S1-G1, Baechle Fall 2018 Miembro de IUPUI, Team S1-G1, Baechle Fall 2018

IUPUI-BAECHLE-F18S1G1

3 Miembros

5 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 28

Todo El Tiempo: 36