Introducción

Be sure to unplug and power off the device before removing any components. Also, save any work before disassembly.

Partes

No se requieren partes.

  1. Push orange locking tab with spudger right,  until battery lifts out of place.
    • Push orange locking tab with spudger right, until battery lifts out of place.

      • Laptop should be unplugged from power supply before removal.

  2. Unscrew the two  7 mm long #0 Phillips screws.
    • Unscrew the two 7 mm long #0 Phillips screws.

    • Lift and remove the cover panel via the indentation in the middle of the panel.

    • Push each of the two silver clips outward to release RAM board.

    • Lift RAM board out of its compartment.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Aaron Allison

Miembro Desde 05/11/18

433 Reputación

5 Guías creadas

Equipo

IUPUI, Team S1-G1, Baechle Fall 2018 Miembro de IUPUI, Team S1-G1, Baechle Fall 2018

IUPUI-BAECHLE-F18S1G1

3 Miembros

5 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 30

Todo El Tiempo: 41