Introducción

Both the battery and rear cover guides should be completed before completing this guide. This guide can be used for replacing a dying hard drive or upgrading your current hard drive.

Partes

No se requieren partes.

  1. Push orange locking tab with spudger right,  until battery lifts out of place.
    • Push orange locking tab with spudger right, until battery lifts out of place.

      • Laptop should be unplugged from power supply before removal.

  2. Unscrew the two  7 mm long #0 Phillips screws.
    • Unscrew the two 7 mm long #0 Phillips screws.

    • Lift and remove the cover panel via the indentation in the middle of the panel.

    • Push spudger to the left until hard drive is moved from its original position.

    • Pull plastic flap and pull hard drive away from laptop.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Aaron Allison

Miembro Desde 05/11/18

433 Reputación

5 Guías creadas

Equipo

IUPUI, Team S1-G1, Baechle Fall 2018 Miembro de IUPUI, Team S1-G1, Baechle Fall 2018

IUPUI-BAECHLE-F18S1G1

3 Miembros

5 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 15

Todo El Tiempo: 53