Saltar al contenido principal

Gateway NE52203u Touchpad Assembly Replacement

Qué necesitas

  1. Gateway NE52203u Touchpad Assembly Replacement, Touchpad Assembly: paso 1, imagen 1 de 2 Gateway NE52203u Touchpad Assembly Replacement, Touchpad Assembly: paso 1, imagen 2 de 2
    • Remove 18 6.0 mm Phillips #00 screws from the bottom of the laptop.

    • Remove 5 6.0 mm Phillip #00 screws from under cover.

  2. Gateway NE52203u Touchpad Assembly Replacement: paso 2, imagen 1 de 1
    • Remove three 2.9 mm Phillips #00 screws from the battery compartment.

  3. Gateway NE52203u Touchpad Assembly Replacement: paso 3, imagen 1 de 2 Gateway NE52203u Touchpad Assembly Replacement: paso 3, imagen 2 de 2
    • Separate the bottom panel from the touchpad assembly by inserting a plastic opening tool between them on all four sides.

  4. Gateway NE52203u Touchpad Assembly Replacement: paso 4, imagen 1 de 1
    • Pull black ribbon wire from port using tweezers in order to completely separate touchpad assembly from bottom assembly.

  5. Gateway NE52203u Touchpad Assembly Replacement: paso 5, imagen 1 de 3 Gateway NE52203u Touchpad Assembly Replacement: paso 5, imagen 2 de 3 Gateway NE52203u Touchpad Assembly Replacement: paso 5, imagen 3 de 3
    • Disconnect the two ZIF ports that attach the touchpad assembly to the motherboard.

    • First flip open the flap covering the ribbon using a spudger or fingernail.

    • Second gently pull the ribbon away from the port.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Stephen Spees

Miembro Desde 03/20/15

542 Reputación

4 Guías creadas

Equipo

Baylor, Team 2-1, Grigsby Spring 2015 Miembro de Baylor, Team 2-1, Grigsby Spring 2015

BU-GRIGSBY-S15S2G1

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 10

Todo El Tiempo: 732