Saltar al contenido principal

Gateway MD2614u RAM Replacement

Qué necesitas

  1. Gateway MD2614u RAM Replacement, Back Cover: paso 1, imagen 1 de 1
    • Place the laptop so the back cover is facing up.

  2. Gateway MD2614u RAM Replacement: paso 2, imagen 1 de 1
    • Remove the 8 screws from the back cover using the Phillips #00 screwdriver.

  3. Gateway MD2614u RAM Replacement: paso 3, imagen 1 de 1
    • Lift off the cover.

  4. Gateway MD2614u RAM Replacement, RAM: paso 4, imagen 1 de 1
    • Identify the RAM, which is a stack of two green cards in the upper left-hand corner.

  5. Gateway MD2614u RAM Replacement: paso 5, imagen 1 de 1
    • There are silver tabs on both sides of the ram. Simultaneously push the silver tabs outward.

  6. Gateway MD2614u RAM Replacement: paso 6, imagen 1 de 1
    • The card pops up 20 degrees and is loose enough to remove with your hand.

    • Carefully pull the card to the right horizontally.

  7. Gateway MD2614u RAM Replacement: paso 7, imagen 1 de 1
    • Follow the same steps for the second RAM card, which is under the one you just removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Toni Pipes

Miembro Desde 10/05/10

333 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 21-31, Regan Fall 2010 Miembro de Cal Poly, Team 21-31, Regan Fall 2010

CPSU-REGAN-F10S21G31

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 4,349