Saltar al contenido principal

Introducción

You are going to remove the back cover, locate the RAM, take out the RAM, and either replace it or reinstall it.

  1. Place the laptop so the back cover is facing up.
    • Place the laptop so the back cover is facing up.

  2. Remove the 8 screws from the back cover using the Phillips #00 screwdriver.
    • Remove the 8 screws from the back cover using the Phillips #00 screwdriver.

  3. Lift off the cover.
    • Lift off the cover.

  4. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  5. Identify the RAM, which is a stack of two green cards in the upper left-hand corner.
    • Identify the RAM, which is a stack of two green cards in the upper left-hand corner.

  6. There are silver tabs on both sides of the ram. Simultaneously push the silver tabs outward.
    • There are silver tabs on both sides of the ram. Simultaneously push the silver tabs outward.

  7. The card pops up 20 degrees and is loose enough to remove with your hand.
    • The card pops up 20 degrees and is loose enough to remove with your hand.

    • Carefully pull the card to the right horizontally.

  8. Follow the same steps for the second RAM card, which is under the one you just removed.
    • Follow the same steps for the second RAM card, which is under the one you just removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Toni Pipes

Miembro Desde 05/10/10

297 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 21-31, Regan Fall 2010 Miembro de Cal Poly, Team 21-31, Regan Fall 2010

CPSU-REGAN-F10S21G31

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 4,116